Phân phối Bộ phát wifi Fortinet FortiAP AP822i Indoor Wireless Access Point dual radio 802.11ac Wave 1, Dual Radio 2.4 GHz and 5 GHz, Up to 300 + 867 Mbps, 2x2 MIMO, 4 Internal Antennas Chính hãng giá tốt
✓ Mã sản phẩm: AP822i
✓ Tình trạng: Còn Hàng
AP822i FortiAP AP822i Indoor Wireless Access Point
| Part Number | : AP822i |
| List Price | : $700 |
| Giá bán | : Giá rẻ nhất thị trường |
| Bảo hành | : 12 tháng |
| Made In | : Liên hệ |
| Stock | :Sẵn hàng |
Mô tả tổng quan
Fortinet FortiAP AP822i cung cấp cho người dùng mạng Gigabit WiFi bằng cách sử dụng công nghệ wifi 802.11ac wave 1 toàn diện, hiệu suất cao, mang lại một trải nghiệm wifi hoàn toàn mới, tiếp cận nhiều đối tượng khách hàng hơn.
Fortinet FortiAP AP822i là giải pháp hiệu quả về chi phí được thiết kế để đáp ứng các yêu cầu về hiệu suất trung bình của văn phòng, trường học, trường đại học, bệnh viện, khách sạn và cửa hàng bán lẻ và hỗ trợ tốc độ dữ liệu tổng cộng lên tới 1,17 Gbps cho các ứng dụng doanh nghiệp khó tính nhất như video và voice.
Thông số kỹ thuật FortiAP AP822i
| TECHNOLOGY | |
| OPERATING MODES | Centralized deployment mode Distributed deployment mode MESH mode Bridge mode Remote VPN tunnel mode |
| SECURITY | WEP, WPA-PSK, WPA-TKIP, WPA2-AES, 802.11i, 802.1X (EAP-TLS, EAP-TTLS, PEAP, LEAP, EAP-FAST, EAP-SIM, EAP-AKA, and EAP-MD5) 802.1X and captive portal authentication against local database on the controller, RADIUS, and Active Directory RADIUS-assisted per-user and per-ESSID access control via MAC filtering |
| MANAGEMENT | Centrally managed by any Fortinet controller running System Director 6.1 or later Automatically discovers controllers and downloads configuration settings for plug-and-play deployment Upgrades and management via System Director / Network Manager Support for SNMP Concurrent Clients Per Radio (Maximum / Recommended) — 128 / 40 |
| WIRELESS SPECIFICATIONS | |
| Model Introduction | dual-radio, single-band IEEE Std 802.11b/g/n for 2.4 GHz band and IEEE Std 802.11a/n/ac for 5.x GHz band access point with four internal omnidirectional antennas |
| Supported Radio Technologies | Dual-radio access point for indoor environment 2x2:2SS (two spatial streams) Supported 2.4 GHz and 5.x GHz for single-band, dual-radio operation; data rate up to 1167 Mbps Supported transmit beam-forming (TxBF) IEEE Std 802.11n/a/g/ac with Orthogonal Frequency Division Multiplexing (OFDM) IEEE Std 802.11b with 22 MHz channels and Direct Sequence Spread Spectrum (DSSS) IEEE Std 802.11ac WAVE1 with 20/40/80 MHz (HT20/HT40/VHT80) channel width IEEE Std 802.11n with 40 MHz (HT40) channel width IEEE Std 802.11a/g with 20 MHz channel |
| Supported Modulation | IEEE Std 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, and 256-QAM IEEE Std 802.11a/g/n: BPSK, QPSK, 16-QAM, and 64-QAM IEEE Std 802.11b: BPSK, QPSK, CCK |
| Supported MCS Index | Supported MCS0–MCS9 for IEEE Std 802.11ac (NSS=1–2) Supported MCS0–MCS15 for IEEE Std 802.11n |
| Supported Frequency Bands | 2.400–2.4835 GHz (ISM) 5.150–5.250 GHz (UNII-1) 5.250–5.350 GHz (UNII-2, DFS) 5.470–5.725 GHz (UNII-2 Extended, DFS) 5.725–5.825 GHz (UNII-3) Country-specific restrictions apply; adjusted by controller upon approva |
| Data Rates Supported (Mbps) | IEEE Std 802.11ac two streams: 13.0–866.7 Mbps (MCS0-HT20 @ 800 nS to MCS9-VHT80 @ 400 nS) IEEE Std 802.11ac per stream: 6.5–433.3 Mbps (MCS0-HT20 @ 800 nS to MCS9-VHT80 @ 400 nS) IEEE Std 802.11n Two streams: 13.0–300.0 Mbps (MCS8-HT20@800nS to MCS15-HT40@400nS) IEEE Std 802.11n per stream: 6.5–150.0 Mbps (MCS0-HT20 @ 800nS to MCS7-HT40@400nS) IEEE Std 802.11a/g: 6, 9, 12, 18, 24, 36, 48, and 54 Mbps IEEE Std 802.11b: 1, 2, 5.5, and 11 Mbps |
| PHYSICAL SPECIFICATIONS | |
| Power | Operated at IEEE Std 802.3af power, powered by IEEE Std 802.3af or 802.3 at PoE (Power over Ethernet) injector or switch 12V external power adapter (sold separately) |
| Other Interfaces | Networks: One 10/100/1000 BASE-T Ethernet RJ45 uplink (G1), one 10/100/1000 BASE-T Ethernet RJ45 (G2) (disabled when powered with 802.3af), auto-sensing link speed and MDI/MDX Four RPSMA RF connectors (For AP822e, external antenna SKU) One RJ45 port (G1) support IEEE Std 802.3af or 802.3 at PoE One USB 2.0 port (Type-A) (disabled when powered with 802.3af) One console port One reset button One Kensington security slot |
| LED Indicators | One tri-color LED for AP status Additional LEDs for Ethernet activity over two RJ45 ports (G1 & G2) |
| Mounting | Wall mount: junction box wall mount bracket included Three mounting kits included with access point: 650-00232, 15/16” T-bar & wall-mount combo adapter 650-00233, 9/16” T-bar adapter Flat-surface wall-mount bracket (used with 650-00232) 840-00126, Wall Mount Hardware Kit (including to 669-00004 space, 665-00085 M3x10 screws, & 665-00102-M3x30 screws) |
| Option (ordered separately) | One RJ45 Console CBL-RJ45-ADAPT-X5, GbE extension adapter MNT-FEET-SET-X5, rubber feet for desktop staging |
| Dimensions | (with mounting bracket): 7.1 x 7.1 x 2.7 inches (18.0 x 18.0 x 6.8 cm) |
| Weight | (with mounting bracket): 2.3 lbs (1.1 kg) |
| Environmental | Operating temperature: 32–122°F (0–50°C) Operating humidity: 5–95% non-condensing Storage temperature: -40–158°F (-40–70°C) ambient Storage humidity: 5–95% non-condensing |
| REGULATORY APPROVAL | |
| REGULATORY APPROVAL | LFCC (United States of America) CE Mark (European Community) Industry Canada (Canada) TELEC (Japan) Safety Approval (worldwide) For more country-specific regulatory approval, please contact your Fortinet representative |
| CERTIFICATIONS | |
| CERTIFICATIONS | WiFi CERTIFIED™ EU RoHS CB Report |
Antenna Model FortiAP AP822i
| Internal Antenna | 2.4–2.5 GHz | 4.9–5.9 GHz |
| Average Antenna Gain | 3.3 dBi | 6 .0 dBi |
| Polarization | Linear | Linear |
| Azimuth Beam-width | 360° | 360° |
| Elevation Beam-width | 75° | 55° |
| VSWR | 1:1.5 | 1:1.5 |
