Aruba AP-304 JX935A, JX937A 802.11n/ac 2x2:2/3x3:3 MU-MIMO Dual Radio Antenna Connectors AP, support for up to 256 associated client devices per radio.
✓ Mã sản phẩm: JX935A
✓ Tình trạng: Còn Hàng
Aruba AP-304 802.11n/ac MU-MIMO Dual Radio Antenna Connectors AP.
Part Number | : JX935A |
List Price | : $730 |
Giá bán | : Giá rẻ nhất thị trường |
Bảo hành | : 12 tháng |
Made In | : Liên hệ |
Stock | :Sẵn hàng |
Thông số kỹ thuật.
WI-FI Radio Specifications | • AP type: indoor, dual radio, 5GHz 802.11ac 3x3 MIMO and 2.4GHz 802.11n 2x2 MIMO - 5.150 to 5.250GHz - 5.250 to 5.350GHz - 5.470 to 5.725GHz - 5.725 to 5.850GHz • Available channels: Dependent on configured regulatory domain - 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM) • Supported modulation types: - 802.11a/g/n/ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM • Transmit power: Configurable in increments of 0.5 dBm - 5GHz band: +18 dBm per chain, +21 dBm aggregate (2x2) - NOTE: conducted transmit power levels exclude antenna gain. For total (EIRP) transmit power, add antenna gain • Advanced Cellular Coexistence (ACC) minimizes interference from cellular networks - 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 - 802.11n: 6.5 to 300 (MCS0 to MCS15) - 802.11ac: 6.5 to 867 (MCS0 to MCS9, NSS = 1 to 2 for VHT20/40/80 • 802.11n high-throughput (HT) support: HT 20/40 |
WI-FI Antennas | Three RP-SMA connectors for external dual band antennas. Worst-case internal loss between radio interface and external antenna connectors (due to diplexing circuitry): 0.8dB in 2.4GHz and 1.6dB in 5GHz. |
Other Interfaces | • One 10/100/1000BASE-T Ethernet network interface (RJ-45) - Auto-sensing link speed and MDI/MDX • 802.3az Energy Efficient Ethernet (EEE) • USB 2.0 host interface (Type A connector) • Bluetooth Low Energy (BLE) radio • Up to 3dBm transmit power (class 2) and -92dBm receive sensitivity • Integrated antenna with roughly 30 degrees downtilt and peak gain of 2.3dBi (AP-304/IAP-304) or 3.4dBi (AP-304/IAP-304) • Visual indicators (multi-color LEDs): for System and Radio status • Reset button: factory reset (during device power up) • Serial console interface (proprietary; optional adapter cable available) • Kensington security slot |
Power Sources and Consumption | • The AP supports direct DC power and Power over Ethernet (POE) • When both power sources are available, DC power takes priority over POE • Power sources are sold separately • Direct DC source: 12Vdc nominal, +/- 5% - Interface accepts 2.1/5.5-mm center-positive circular plug with 9.5-mm length • Power over Ethernet (POE): 48 Vdc (nominal) 802.3af/802.3at compliant source - Unrestricted functionality with 802.3at POE - When using IPM, the AP may enter power-save mode with reduced functionality when powered by an 802.3af POE source (see details on Intelligent Power Monitoring elsewhere in this datasheet) - Without IPM, the USB port is disabled when the AP is powered by and 802.3af POE source • Maximum (worst-case) power consumption: 13W (POE) or 12W (DC) - Excludes power consumed by external USB device (and internal overhead); this could add up to 6.5W (POE) or 5.5W (DC) for a 5W/1A USB device • Maximum (worst-case) power consumption in idle mode: 3.7W (POE) or 2.6W (DC) |
Mounting | • The AP ships with two (white) mounting clips to attach to a 9/16-inch or 15/16-inch flat T-bar drop-tile ceiling. • Several optional mount kits are available to attach the AP to a variety of surfaces; see the Ordering Information section below for details |
Mechanical | Dimensions/weight (unit, excluding mount accessories): - 165mm x 165mm x 38mm - 460g |
Environmental | • Operating: - Humidity: 5% to 95% non-condensing • Storage and transportation: |
Regulatory | • FCC/Industry of Canada • CE Marked • R&TTE Directive 1995/5/EC • Low Voltage Directive 72/23/EEC • EN 300 328 • EN 301 489 • EN 301 893 • UL/IEC/EN 60950 • EN 60601-1-1 and EN 60601-1-2 |