Aruba AP-344 RW JZ021A Dual 4x4:4 MU-MIMO Radio Antenna Connectors Smart Rate Unified Campus AP, Regulatory Model Numbers APIN0344.
✓ Mã sản phẩm: JZ021A
✓ Tình trạng: Còn Hàng
Aruba AP-344 Dual Radio Antenna Connectors Smart Rate Access Point.
| Part Number | : JZ021A |
| List Price | : $Liên hệ ngay nhận giá tốt |
| Giá bán | : Giá rẻ nhất thị trường |
| Bảo hành | : 12 tháng |
| Made In | : Liên hệ |
| Stock | :Sẵn hàng |
Các điểm truy cập Aruba AP-344 cung cấp tốc độ dữ liệu gigabit và trải nghiệm người dùng tuyệt vời cho các thiết bị và ứng dụng di động, được thiết kế với cổng HPE SmartRate multi-gig đạt chuẩn 802.3bz cung cấp hiệu suất và dung lượng mạng không dây mạnh mẽ. Access Point AP-344 được thiết kế sử dụng kiến trúc kép 5 GHz độc đáo và linh hoạt, cung cấp gấp đôi dung lượng khi cần mà không ảnh hưởng hay hạn chế.
AP-344 tích hợp công nghệ ClientMatch tiên tiến của Aruba, có thể tự động phát hiện và phân loại các thiết bị di động có khả năng 802.11ac Wave 2. Điều này cho phép ap tự động nhóm các thiết bị có khả năng Wave 2 vào một radio duy nhất để tăng hiệu suất của MU-MIMO mà không gây ảnh hưởng đến các thiết bị di động truyền thống chỉ hỗ trợ 802.11ac và 802.11n.
Thông số kỹ thuật
| TECHNICAL SPECIFICATIONS | |
| AP type | Indoor, dual radio, 5 GHz 802.11ac 4x4 MIMO and 2.4 GHz 802.11n 4x4 MIMO |
| Radio 5Ghz | - Four spatial stream Single User (SU) MIMO for up to 1,733 Mbps wireless data rate to individual 4SS VHT80 or 2SS VHT160 client devices - Four spatial stream Multi User (MU) MIMO for up to 1,733 Mbps wireless data rate to up to four 1SS or two 2SS MU-MIMO capable client devices simultaneously - Peak datarate increases to 2,166 Mbps when using 1024-QAM modulation (proprietary extension) |
| Radio 2.4Ghz | - Four spatial stream Single User (SU) MIMO for up to 600 Mbps wireless data rate to individual 4SS HT40 client devices, and up to 800 Mbps to individual 4SS VHT40 devices (proprietary extension) |
| Maximum number of associated client devices | Up to 256 associated client devices per radio |
| Maximum number of BSSIDs | 16 BSSIDs per radio |
| Supported frequency bands (country-specific restrictions apply) | - 2.400 to 2.4835 GHz - 5.150 to 5.250 GHz - 5.250 to 5.350 GHz - 5.470 to 5.725 GHz - 5.725 to 5.850 GHz |
| Dynamic frequency selection (DFS) optimizes the use of available RF spectrum | |
| Supported radio technologies | - 802.11b: Direct-sequence spread-spectrum (DSSS) - 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM) |
| Supported modulation types | - 802.11b: BPSK, QPSK, CCK - 802.11a/g/n/ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM |
| 802.11n high-throughput (HT) support | HT20/40 |
| 802.11ac very high throughput (VHT) support: | VHT20/40/80/160 |
| Supported data rates (Mbps): | - 802.11b: 1, 2, 5.5, 11 - 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 - 802.11n: 6.5 to 600 (MCS0 to MCS31) - 802.11ac: 6.5 to 1,733 (MCS0 to MCS9, NSS = 1 to 4 for VHT20/40/80, NSS = 1 to 2 for VHT160) |
| 802.11n/ac packet aggregation: | A-MPDU, A-MSDU |
| Transmit power | Configurable in increments of 0.5 dBm |
| Maximum (aggregate, conducted total) transmit power (limited by local regulatory requirements): | - 2.4 GHz band: +24 dBm, 18 dBm per chain - 5 GHz band: +24 dBm, 18 dBm per chain |
| WI-FI ANTENNAS | |
| Antenna | External antenna models. Two sets of four RP-SMA antenna connectors: - Primary: A0 – A3, connected to chains 0 through 3 respectively on each associated radio » With AP in dual-radio mode: dual-band interfaces, diplexing signals to/from radio 0 (full 5 GHz) and radio 1 (2.4 GHz) » With AP in dual-5 GHz mode: 5 GHz interfaces from radio 0 (upper 5 GHz) - Secondary: B0 – B3, connected to chains 0 through 3 respectively » With AP in dual-radio mode: not used » With AP in dual-5 GHz mode: 5 GHz interfaces from radio 1 (lower 5 GHz) - Total internal losses between radio and external connectors: » With AP in dual-radio mode: 2.0 dB for 5 GHz, 2.0 dB for 2.4 GHz » With AP in dual-5 GHz mode: 2.0 dB for upper 5 GHz, 1.7 dB for lower 5 GHz |
| OTHER INTERFACES | |
| Interfaces | • One HPE SmartRate port (RJ-45, maximum negotiated speed 2.5 Gbps) - Auto-sensing link speed (100/1000/2500BASE-T) and MDI/MDX - 2.5 Gbps speed complies with NBase-T and 802.3bz specifications - PoE-PD: 48Vdc (nominal) 802.3at PoE - 802.3az Energy Efficient Ethernet (EEE) • One 10/100/1000BASE-T Ethernet network interface (RJ-45) - Auto-sensing link speed and MDI/MDX - PoE-PD: 48Vdc (nominal) 802.3at PoE - 802.3az Energy Efficient Ethernet (EEE) • Link aggregation (LACP) support between both network ports for redundancy and increased capacity • DC power interface, accepts 1.35/3.5-mm center-positive circular plug with 9.5-mm length • USB 2.0 host interface (Type A connector) • Bluetooth Low Energy (BLE) radio - Up to 4 dBm transmit power (class 2) and -91 dBm receive sensitivity - Integrated vertically polarized omnidirectional antenna with roughly 30 degrees downtilt and peak gain of 3.1 dBi. • Visual indicators (tri-color LEDs): for System and Radio status • Reset button: factory reset, LED mode control (normal/off) • Serial console interface (proprietary, µUSB physical jack) • Kensington security slot |
| FLEXIBLE OPERATION AND MANAGEMENT | |
| Controller-based mode | When deployed in conjunction with an Aruba Mobility Controller, Aruba 340 Series APs offer centralized configuration, data encryption, policy enforcement and network services, as well as distributed and centralized traffic forwarding |
| Controller-less (Instant) mode | The controller function is virtualized in a cluster of APs in Instant mode. As the network grows and/or requirements change, Instant deployments can easily migrate to controller-based mode |
| Remote AP (RAP) | for branch deployments |
| Air monitor (AM) | for wireless IDS, rogue detection, and containment. |
| POWER SOURCES AND POWER CONSUMPTION | |
| Power Sources | • The AP supports direct DC power and Power over Ethernet (PoE) |
| MECHANICAL SPECIFICATIONS | |
| Dimensions/weight (unit, excluding mount accessories): | - 22.5 cm (W) x 22.4 cm (D) x 5.2 cm (H) 8.9” (W) x 8.9” (D) x 2.0” (H) - 1.05 kg or 2.31 lbs |
| Dimensions/weight (shipping): | - 33.9 cm (W) x 29 cm (D) x 8.8 cm (H) 13.3” (W) x 11.4” (D) x 3.5” (H) - 1.65 kg or 3.63 lbs |
| ENVIRONMENTAL SPECIFICATIONS | |
| Operating conditions | - Temperature: 0° C to +50° C (+32° F to +122° F) - Humidity: 5% to 93% non-condensing |
| Storage and transportation conditions | - Temperature: -40° C to +70° C (-40° F to +158° F) |
| RELIABILITY | |
| Mean Time Between Failure (MTBF): | MTBF: 640khrs (73yrs) at +25C operating temperature |
| MINIMUM OPERATING SYSTEM SOFTWARE VERSIONS | |
| ArubaOS | 8.3.0.0 |
| Minimum Software Release | 8.3.0.0 |
