Aruba Instant IAP-304 JX942A, JX939A, JX943A, JX9
40A, JX944A 802.11n/ac Dual 2x2:2/3x3:3 MU-MIMO Radio Antenna Connectors AP. Support for up to 256 associated client devices per radio.
✓ Mã sản phẩm: JX939A
✓ Tình trạng: Còn Hàng
Aruba Instant IAP-304 802.11n/ac MU-MIMO Radio Antenna Connectors AP.
Part Number | : JX939A |
List Price | : $695 |
Giá bán | : Giá rẻ nhất thị trường |
Bảo hành | : 12 tháng |
Made In | : Liên hệ |
Stock | :Sẵn hàng |
IAP-304 là thiết bị wifi nhỏ gọn cung cấp tốc độ dữ liệu đồng thời tối đa 1300Mbps ở băng tần 5GHz và 300 Mbps ở băng tần 2.4GHz (cho tốc độ dữ liệu cao nhất tổng hợp là 1.6Gbps). IAP-304 hỗ trợ công nghệ 802.11ac, MIMO (MU-MIMO) và 3 luồng không gian (3SS) đem tới hiệu suất cao. Nó cung cấp truyền dữ liệu đồng thời đến nhiều thiết bị (tối đa hai), tối đa hóa thông lượng dữ liệu và cải thiện hiệu quả mạng..
IAP-304 với Bluetooth Beacon tích hợp cung cấp vị trí, khả năng định vị và các dịch vụ thông báo dựa trên vùng lân cận đồng thời đơn giản hóa việc quản lý từ xa. Nó cho phép các doanh nghiệp tận dụng sức mạnh di động để phát triển các ứng dụng mang lại trải nghiệm nâng cao cho người dùng và tăng giá trị của mạng không dây.
Thông số kỹ thuật.
WI-FI Radio Specifications | • AP type: indoor, dual radio, 5GHz 802.11ac 3x3 MIMO and 2.4GHz 802.11n 2x2 MIMO - 5.150 to 5.250GHz - 5.250 to 5.350GHz - 5.470 to 5.725GHz - 5.725 to 5.850GHz • Available channels: Dependent on configured regulatory domain - 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM) • Supported modulation types: - 802.11a/g/n/ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM • Transmit power: Configurable in increments of 0.5 dBm - 5GHz band: +18 dBm per chain, +21 dBm aggregate (2x2) - NOTE: conducted transmit power levels exclude antenna gain. For total (EIRP) transmit power, add antenna gain • Advanced Cellular Coexistence (ACC) minimizes interference from cellular networks - 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 - 802.11n: 6.5 to 300 (MCS0 to MCS15) - 802.11ac: 6.5 to 867 (MCS0 to MCS9, NSS = 1 to 2 for VHT20/40/80 • 802.11n high-throughput (HT) support: HT 20/40 |
WI-FI Antennas | Three RP-SMA connectors for external dual band antennas. Worst-case internal loss between radio interface and external antenna connectors (due to diplexing circuitry): 0.8dB in 2.4GHz and 1.6dB in 5GHz. |
Other Interfaces | • One 10/100/1000BASE-T Ethernet network interface (RJ-45) - Auto-sensing link speed and MDI/MDX • 802.3az Energy Efficient Ethernet (EEE) • USB 2.0 host interface (Type A connector) • Bluetooth Low Energy (BLE) radio • Up to 3dBm transmit power (class 2) and -92dBm receive sensitivity • Integrated antenna with roughly 30 degrees downtilt and peak gain of 2.3dBi (AP-304/IAP-304) or 3.4dBi (AP-304/IAP-304) • Visual indicators (multi-color LEDs): for System and Radio status • Reset button: factory reset (during device power up) • Serial console interface (proprietary; optional adapter cable available) • Kensington security slot |
Power Sources and Consumption | • The AP supports direct DC power and Power over Ethernet (POE) • When both power sources are available, DC power takes priority over POE • Power sources are sold separately • Direct DC source: 12Vdc nominal, +/- 5% - Interface accepts 2.1/5.5-mm center-positive circular plug with 9.5-mm length • Power over Ethernet (POE): 48 Vdc (nominal) 802.3af/802.3at compliant source - Unrestricted functionality with 802.3at POE - When using IPM, the AP may enter power-save mode with reduced functionality when powered by an 802.3af POE source (see details on Intelligent Power Monitoring elsewhere in this datasheet) - Without IPM, the USB port is disabled when the AP is powered by and 802.3af POE source • Maximum (worst-case) power consumption: 13W (POE) or 12W (DC) - Excludes power consumed by external USB device (and internal overhead); this could add up to 6.5W (POE) or 5.5W (DC) for a 5W/1A USB device • Maximum (worst-case) power consumption in idle mode: 3.7W (POE) or 2.6W (DC) |
Mounting | • The AP ships with two (white) mounting clips to attach to a 9/16-inch or 15/16-inch flat T-bar drop-tile ceiling. • Several optional mount kits are available to attach the AP to a variety of surfaces; see the Ordering Information section below for details |
Mechanical | Dimensions/weight (unit, excluding mount accessories): - 165mm x 165mm x 38mm - 460g |
Environmental | • Operating: - Humidity: 5% to 95% non-condensing • Storage and transportation: |
Regulatory | • FCC/Industry of Canada • CE Marked • R&TTE Directive 1995/5/EC • Low Voltage Directive 72/23/EEC • EN 300 328 • EN 301 489 • EN 301 893 • UL/IEC/EN 60950 • EN 60601-1-1 and EN 60601-1-2 |